Pixels - Double Check Affiliate Pixels after Testing

Owned by Paul Cernea (Unlicensed)
Mar 06, 2019


After testing an offer, you may want to know where to look into Everflow to see if the affiliate pixels fire or not.


1 - Make sure your affiliate pixel is placed for that specific offer - You can still consult that documentation to do so

2 - Test the offer

3 - After testing, make sure the test conversion occured in the reporting section. If not you might be cache, so try again. If you still do not see your test conversion, contact ops.

4 - If the test conversion is successful and you see your conversion into the reporting section, click on the Affiliate Postback menu under Reporting 


5 - Run a report using the date where you tested the offer.

6 - In the list, look for you affiliate and the offer you tested. Look at the status code. If you see success it means that the pixel fire back to your advertiser. If you see Rejected, something has been wrong with the pixel. Contact ops.


7 - You can search at a specific pixel by Conversion ID, payload and Transaction ID.